TCAN1043ATDMTRQ1中文資料德州儀器數(shù)據(jù)手冊PDF規(guī)格書

1 Features

? AEC Q100 (Grade 1) Qualified for automotive

applications

? Functional Safety-Capable

– Documentation available to aid in functional

safety system design

? Meets the requirements of ISO 11898-2:2016

? Wide input operational voltage range

? Supports classic CAN and CAN FD up to 8 Mbps

(TCAN1043A-Q1) or 5 Mbps (TCAN1043AT-Q1)

? VIO level shifting supports: 1.7 V to 5.5 V

? Operating modes:

– Normal mode

– Silent mode

– Standby mode

– Low-power sleep mode

? High-voltage INH output for system power control

? Local wake-up support via the WAKE pin

? Sleep Wake Error (SWE) timer enables safe

transition from standby mode to sleep mode in the

event of a system power failure or software fault

– Allows for extended power-up time

? Defined behavior when unpowered

– Bus and IO terminals are high impedance (no

load to operating bus or application)

? Protection features:

– ±58-V CAN bus fault tolerant

– Load dump support on VSUP

– IEC ESD protection

– Under-voltage protection

– Thermal shutdown protection

– TXD dominant state timeout (TXD DTO)

? Available in 14-pin leaded (SOT and SOIC)

packages and leadless (VSON) package with

wettable flanks for improved automated optical

inspection (AOI) capability

2 Applications

? Body electronics and lighting

? Automotive gateway

? Advanced driver assistance systems (ADAS)

? Infotainment and cluster

? Hybrid, electric & powertrain systems

? Personal transport vehicles - electric bike

? Industrial transportation

3 Description

The TCAN1043A-Q1 is a high-speed Controller Area

Network (CAN) transceiver that meets the physical

layer requirements of the ISO 11898-2:2016 highspeed

CAN specification. The device supports both

classical CAN and CAN FD data rates up to 8

megabits per second (Mbps) (TCAN1043A-Q1) or 5

Mbps (TCAN1043AT-Q1).

The TCAN1043A-Q1 allows for system-level

reductions in battery current consumption by

selectively enabling the various power supplies that

may be present on a system via the INH output

pin. This allows a low-current sleep state in which

power is gated to all system components except for

the TCAN1043A-Q1, while monitoring the CAN bus.

When a wake-up event is detected, the TCAN1043AQ1

initiates system start-up by driving INH high.

The TCAN1043A-Q1 features an SWE timer that

enables a safe transition to Sleep mode after 4

minutes (tINACTIVE) of inactivity in Standby mode. This

makes sure the device is transitioned to low-power

Sleep mode if the MCU fails to transition the device to

Normal mode.