THDS410.25SA工業(yè)自動化與控制的延時繼電器規(guī)格書PDF中文資料

Description

The THDS Series combines accurate timing circuitry with high

power solid-state switching. It can switch motors, lamps, and

heaters directly without a contactor. You can reduce labor,

component cost, and increase reliability with these small,

easy-to-use, timers.

Operation (Single Shot)

Input voltage must be applied before and during timing. Upon

momentary or maintained closure of the initiate switch, the

output energizes for a measured interval of time. At the end

of the delay, the output de-energizes. Opening or reclosing the

initiate switch during timing has no affect on the time delay.

The output energizes if the initiate switch is closed when input

voltage is applied.

Reset: Reset occurs when the time delay is complete and the

initiate switch is opened. Loss of input voltage resets the time

delay and output.

FEATURES BENEFITS

Microcontroller based Repeat Accuracy + / - 0.5,

Factory calibration +/- 1

High load currents up

to 20A, 200A inrush

Allows direct operation of motors, lamps and

heaters without a contactor

Totally solid state

and encapsulated

No moving parts to arc and wear out over time and

encapsulated to protect against shock, vibration,

and humidity

Metalized

mounting surface Facilitates heat transfer in high current applications

Compact, low

cost design

Allows flexibility for OEM applications and reduces

labor and component costs