TPMC118-SW-42中文資料TEWS數據手冊PDF規格書

Application Information

The standard single-width 32 bit PMC module TPMC118 is designed for motion control applications offering six independent channels. Each channel consists of a TTL / RS422 compatible encoder interface, one digital 24V input and one +/-10V analog output.

The position feedback for each of the six channels is provided by an encoder interface and a 32 bit up/down counter with preload and latch register. The input level of the encoder signals can be TTL or RS422. All six encoder interfaces are isolated from the local controller unit by high speed optocouplers. An on board DC/DC converter supplies the isolated part. The encoder signals pass a digital filter for noise suppression before they are fed to the counters and reference logic. The counters are programmable for single, double and quadruple analysis of the encoder signals. The maximum frequency of the encoder inputs is 2 MHz.

An ‘a(chǎn)uto reference mode’ provides the possibility of automatic preload of the encoder counter during normal operation, whenever the motion system passes the reference position.

Each of the six motion control channels of the TPMC118 offers one digital 24V input which is galvanically isolated by optocoupler. A high performance input circuit ensures a defined switching point and polarization protection against confusing the pole. The input has an electronic debounce circuit. Each of the six digital 24V inputs can generate an interrupt, triggered on rising or falling edge. Depending on the selected mode the input can be used as general purpose input or reference input.

The +/-10V analog output of each channel is realized by a 16 bit digital to analog converter (DAC). An operational amplifier is used to drive high capacitive loads and to protect the DAC’s.

Driver support (TPMC118-SW-xx) is available for different operating systems.