TPS65036601RAYRQ1中文資料德州儀器數(shù)據(jù)手冊(cè)PDF規(guī)格書

1 Features

? Qualified for automotive applications

? AEC-Q100 qualified with following results:

– Device operates from 4V to 35V input supply

– Device temperature grade 1: -40°C to +125°C

? Functional Safety -compliant

– Developed for functional safety applications

– Documentation available to aid ISO26262 and

IEC61508 system design

– Systematic integrity up to ASIL-D

– Systematic integrity up to SIL-3

– Hardware integrity up to ASIL-B

– Hardware integrity up to SIL-2

– Under/overvoltage monitors with Built-In Self-

Test

– Watchdog (trigger or Q&A), Error Signal

Monitor

– Temperature warning and thermal shutdown

? Wide-VIN step-down converter BUCK1

– VIN range from 4V to 35V

– VOUT range from 3V to 5.5V

– Output current up to 2000mA

– 2.2MHz switching frequency

? Two Low-VIN step-down converters BUCK2,

BUCK3:

– VIN range from 3.0V to 5.5V

– VOUT range from 0.6V to 3.4V

– Output current up to 2700mA peak

– 2.2MHz or 4.4MHz switching frequency

? One low dropout (LDO) regulator:

– VIN range from 3.0V to 5.5V

– VOUT range from 1.8V to 3.4V

– Up to 300mA output current

– Low noise and high PSRR

? 3.5mm × 3.5mm 24-pin VQFN with wettable flanks

2 Applications

? Automotive camera modules

– Surround view camera modules

– Rear view camera modules

– DMS (driver monitoring systems)

– Power over coax (POC) camera modules

– E-mirror camera modules

? Automotive radar modules

– Ultra-short range radar

– Kick-to-open

– Park assist and automated parking

– Driver monitor systems

– Vehicle occupancy detection, child presence

detection (CPD)

– Vehicle intruder detection

– Seat belt monitoring

? Safety MCU power

– OBC, DC/DC, zonal controller

– Inverter and motor control (traction inverter)

– Heating and cooling (automotive HVAC

compressor module)

3 Description

The TPS65036x-Q1 device is a highly integrated

power management IC for automotive camera and

radar modules and MCU power. This device combines

three step-down converters and one low-dropout

(LDO) regulator. The BUCK1 step-down converter

has an input voltage range up to 35V. All converters

can operate in a forced fixed-frequency PWM mode

or an AutoPFM mode and support optional spreadspectrum

modulation (SSM) for EMI reduction. The

LDO can supply 300mA and operate with an input

voltage range from 3V to 5.5V. The TPS65036x-Q1

support low power mode with control from pin or I2C.

The TPS65036x-Q1 is available in a 24-pin VQFN

package (3.5mm × 3.5mm).