TPS7A03集成電路（IC）的線性+開關穩壓器規格書PDF中文資料

TPS7A03屬于集成電路（IC）的線性+開關穩壓器。由德州儀器制造生產的TPS7A03穩壓器 - 線性線性穩壓器用于提供穩定的輸出電壓，無論負載電流、輸入電壓或環境因素如何變化，這些輸出電壓通常都要保持不變。它們的工作原理要求輸入電壓維持在高于所需的輸出電壓，而且要超出某個最小量，并且在工作時會將輸入端的任何多余電壓轉換為熱量。對于大多數應用而言，雖然這種穩壓器的效率低于開關模式的穩壓器，但它們通常更適合對噪聲高度敏感的應用。

1 Features

? Ultra-low IQ: 200 nA (typ), even in dropout

? Shutdown IQ: 3 nA (typ)

? Excellent transient response (1 mA to 50 mA)

– < 10-μs settling time

– 80-mV undershoot

? Packages:

– 1.0-mm × 1.0-mm X2SON

– SOT23-5

– 0.64-mm × 0.64-mm DSBGA

? Input voltage range: 1.5 V to 6.0 V

? Output voltage range: 0.8 V to 5.0 V (fixed)

? Output accuracy: 1.5 over temperature

? Smart enable pulldown

? Very low dropout:

– 270 mV (max) at 200 mA (VOUT = 3.3 V)

? Stable with a 1-μF or larger capacitor

2 Applications

? Wearables electronics

? Thermostats, smoke and heat detectors

? Gas, heat, and water meters

? Blood glucose monitors and pulse oximeters

? Residential circuit breakers and fault indicators

? Building security and video surveillance devices

? EPOS card readers

3 Description

The TPS7A03 is an ultra-small, ultra-low quiescent

current low-dropout linear regulator (LDO) that can

source 200 mA with excellent transient performance.

The TPS7A03, with an ultra-low IQ of 200 nA, is

designed specifically for applications where very-low

quiescent current is a critical parameter. This device

maintains low IQ consumption even in dropout mode

to further increase battery life. When in shutdown or

disabled mode, the device consumes ultra-low,

3-nA IQ that helps increase the shelf life of the battery.

The TPS7A03 has an output range of 0.8 V to 5.0

V available in 50-mV steps to support the lower core

voltages of modern microcontrollers (MCUs).

The TPS7A03 features a smart enable circuit with an

internally controlled pulldown resistor that keeps the

LDO disabled even when the EN pin is left floating

and helps minimize the external components used to

pulldown the EN pin. This circuit also helps minimize

the current drawn through the external pulldown

circuit when the device is enabled.

The TPS7A03 is fully specified for TJ = –40°C to

+125°C operation.