TXB0104集成電路（IC）的轉換器電平移位器規格書PDF中文資料

TXB0104屬于集成電路（IC）的轉換器電平移位器。由德州儀器制造生產的TXB0104轉換器，電平移位器邏輯轉換器或電平移位器 IC 可用于在數字邏輯設備之間傳遞信息，這些設備可在不同/不兼容的供電電壓下工作，或可實現不同的信令方式。例如，可以將需要 5 V 電源的數字輸出傳感器連接到具有 3.3 V I/O 電源的 FPGA，或者在 CMOS 或 TTL 等單端信令方式與 PECL 或 LVDS 等差分技術之間進行轉換。

1 Features

? 1.2V to 3.6V on A port and 1.65V to 5.5V on B port

(VCCA ≤ VCCB)

? VCC isolation feature: if either VCC input ss at GND,

all outputs are in the high-impedance state

? Output enable (OE) input circuit referenced to

VCCA

? Low power consumption, 5μA maximum ICC

? I OFF supports partial power-down mode operation

? Latch-up Performance Exceeds 100mA Per JESD

78, Class II

? ESD Protection Exceeds JESD 22

– A Port:

? 2500V Human-Body Model (A114-B)

? 1500V Charged-Device Model (C101)

– B Port:

? ±15kV Human-Body Model (A114-B)

? 1500V Charged-Device Model (C101)

2 Applications

? Headsets

? Smartphones

? Tablets

? Desktop PC

3 Description

This TXB0104 4-bit noninverting translator uses two

separate configurable power-supply rails. The A port

is designed to track VCCA. VCCA accepts any supply

voltage from 1.2V to 3.6V. The B port is designed

to track VCCB. VCCB accepts any supply voltage from

1.65V to 5.5V. This allows for universal low-voltage

bidirectional translation between any of the 1.2V, 1.5V,

1.8V, 2.5V, 3.3V, and 5V voltage nodes. VCCA must

not exceed VCCB.

When the OE input is low, all outputs are placed in the

high-impedance state. To ensure the high-impedance

state during power up or power down, OE must

be tied to GND through a pulldown resistor The

current sourcing capability of the driver determines

the minimum value of the resistor.

The TXB0104 device is designed so the OE input

circuit is supplied by VCCA.

This device is fully specified for partial powerdown

applications using I OFF. The I OFF circuitry

disables the outputs, which prevents damaging

current backflow through the device when the device

is powered down.