TXS0101DBVT集成電路（IC）的轉換器電平移位器規格書PDF中文資料

TXS0101DBVT屬于集成電路（IC）的轉換器電平移位器。由德州儀器制造生產的TXS0101DBVT轉換器，電平移位器邏輯轉換器或電平移位器 IC 可用于在數字邏輯設備之間傳遞信息，這些設備可在不同/不兼容的供電電壓下工作，或可實現不同的信令方式。例如，可以將需要 5 V 電源的數字輸出傳感器連接到具有 3.3 V I/O 電源的 FPGA，或者在 CMOS 或 TTL 等單端信令方式與 PECL 或 LVDS 等差分技術之間進行轉換。

1 Features

? Latch-up performance exceeds 100mA per JESD

78, class II

? ESD protection exceeds JESD 22:

– A Port:

? 2500V Human-Body Model (A114-B)

? 200V Machine Model (A115-A)

? 1500V Charged-Device Model (C101)

– B port:

? 8kV Human-Body Model (A114-B)

? 200V Machine Model (A115-A)

? 1500V Charged-Device Model (C101)

? No direction-control signal needed

? Maximum data rates:

– 24Mbps (push pull)

– 2Mbps (open drain)

? Available in the Texas Instruments NanoFree?

package

? 1.65V to 3.6V on A port and 2.3V to 5.5V on B port

( VCCA ≤ VCCB)

? VCC isolation feature – if either VCC input is at

GND, both ports are in the high-impedance state

? No power-supply sequencing required – either

VCCA or VCCB can be ramped first

? Ioff supports partial-power-down mode operation

2 Applications

? Handsets

? Smartphones

? Tablets

? Desktop PCs

3 Description

This one-bit non-inverting translator uses two

separate configurable power-supply rails. The A port

is designed to track VCCA. VCCA accepts any supply

voltage from 1.65V to 3.6V. VCCA must be less than or

equal to VCCB . The B port is designed to track VCCB.

VCCB accepts any supply voltage from 2.3V to 5.5V.

This allows for low voltage bidirectional translation

between any of the 1.8V, 2.5V, 3.3V, and 5V voltage

nodes.

When the output-enable (OE) input is low, all outputs

are placed in the high-impedance state.

To put the device in the high-impedance state during

power up or power down, tie OE to GND through

a pull-down resistor; the current-sourcing capability

of the driver determines the minimum value of the

resistor.