U3741BM-M2FL中文資料TEMIC數(shù)據(jù)手冊(cè)PDF規(guī)格書

Description

The U3741BM is a multi-chip PLL receiver device supplied in an SO20 package. It has been specially developed for the demands of RF low-cost data transmission systems with low data rates from 1 kBaud to 10 kBaud (1 kBaud to 3.2 kBaud for FSK) in Manchester or Bi-phase code. The receiver is well suited to operate with the TEMIC PLL RF transmitter U2741B. Its main applications are in the areas of telemetering, security technology and keyless-entry systems. It can be used in the frequency receiving range of f0 = 300 MHz to 450 MHz for ASK or FSK data transmission. All the statements made below refer to 433.92-MHz and 315-MHz applications.

Features

● Minimal external circuitry requirements, no RF components on the PC board except adaptation to the receiver antenna

● High sensitivity, especially at low data rates

● Sensitivity reduction possible even while receiving

● Fully integrated VCO

● Low power consumption due to configurable self polling with a programmable timeframe check

● Supply voltage 4.5 V to 5.5 V, operating temperature range –40°C to 105°C

● Single-ended RF input for easy adaptation to λ/4 antenna or printed antenna on PCB

● Low-cost solution due to high integration level

● ESD protection according to MIL-STD. 883 (4KV HBM) except Pin POUT (2KV HBM)

● High image frequency suppression due to 1 MHz IF in conjunction with a SAW front-end filter. Up to 40 dB is thereby achievable with newer SAWs.

● Programmable output port for sensitivity selection or for controlling external periphery

● Communication to C possible via a single, bi-directional data line

● Power management (polling) is also possible by means of a separate pin via the C

● 2 different IF bandwidth versions are available (300 kHz and 600 kHz)