U9280M-H中文資料愛特梅爾數(shù)據(jù)手冊PDF規(guī)格書

Description

The U9280M-H IC is a multi-chip module for remote control and contactless ID systems. It consists of the ATAR092 microcontroller and U3280M transponder interface circuit with EEPROM. A coil connected to the transponder interface serves as a wire less bi-directional communication interface as well as a power supply for the microcontroller and the interface. As a transponder, the device is supplied by a magnetic RF field applied at the coil. For IR- or RF-transmitter applications, it can be supplied by a battery. The microcontroller supports, with its built-in timers, a wide range of IR- and RF-transmission modes such as burst-modulation modes, PWM-, NRZ-, Manchester- and Bi-phase coding.

Features

? 4-bit HARVARD Architecture

? 4k ×8-bit Application ROM

? 256 ×4-bit RAM

? 32 ×16-bit EEPROM

? 10 Bi-directional I/Os

? 4 External Interrupt Inputs (SSO20)

? 8 Interrupt Levels

? 2 ×8-bit Multifunction Timer/Counter

? Interval Timer with Watchdog

? Two-Wire Interface (TWI)

? Voltage Supervisor

? On-chip RC Oscillator

? On-chip Crystal Oscillator

Benefits

? Contactless Power Supply and Communication Interface

? Power Management for Contactless and Battery Power Supply

? Shift-register-supported Modulator and Demodulator Stages

? Low Power Consumption

? Active Mode < 300 μA at 2V and 1 MHz System Clock Frequency(2 μs Instruction Cycle)

? Power-down Mode < 1 μA

? Supply Voltage 2.0V to 6.5V

? High-level Language Programming in qFORTH

? Operating Speed: 1 μs to 10 μs Instruction Cycle (2 μs at VDD = 2V)