X9313WSIZ集成電路（IC）的數(shù)字電位計規(guī)格書PDF中文資料

The Intersil X9313 is a digitally controlled potentiometer

(XDCP). The device consists of a resistor array, wiper

switches, a control section, and nonvolatile memory. The

wiper position is controlled by a 3-wire interface.

The potentiometer is implemented by a resistor array

composed of 31 resistive elements and a wiper switching

network. Between each element and at either end are tap

points accessible to the wiper terminal. The position of the

wiper element is controlled by the CS, U/D, and INC inputs.

The position of the wiper can be stored in nonvolatile

memory and then be recalled upon a subsequent power-up

operation.

The device can be used as a three-terminal potentiometer or

as a two-terminal variable resistor in a wide variety of

applications including:

? Control

? Parameter adjustments

? Signal processing

Features

? Solid-state potentiometer

? 3-wire serial interface

? 32 wiper tap points

- Wiper position stored in nonvolatile memory and

recalled on power-up

? 31 resistive elements

- Temperature compensated

- End-to-end resistance range ±20

- Terminal voltages, -VCC to +VCC

? Low power CMOS

- VCC = 3V or 5V

- Active current, 3mA max.

- Standby current, 500μA max.

? High reliability

- Endurance, 100,000 data changes per bit

- Register data retention, 100 years

? RTOTAL values = 1k?, 10k?, 50k?

? Packages

- 8 Ld SOIC, 8 Ld MSOP and 8 Ld PDIP

? Pb-free available (RoHS compliant)